|
联系方式： 电话：15898165779 邮箱：caiyd@dlut.edu.cn 办公室：机械工程学院知方楼6118室
个人简介： 博士，副教授，硕士生导师 |
工作学习经历：
2006年09月 至 2010 年6月，兰州理工大学，理论与应用力学，学士；
2010年09月 至 2012 年6月，重庆大学，力学，硕士；
2014年04月 至 2017 年3月，日本东北大学，纳米机械，博士；
2017年05月 至 2019年12月，开云平台首页 机械工程学院，讲师；
2020年01月 至今，开云平台首页 机械工程学院，副教授。
研究方向：
1、机床精度检测与误差控制
2、形状及形状误差测量
文章专利：
1）Yindi Cai, Yuan-LiuChen, Malu Xu, Yuki Shimizu, So Ito, Hiraku Matsukuma, Wei Gao, An ultra-precision tool nanoindentation instrument for replication of single point diamond tool cutting edges,Measurement Science and Technology, Vol. 29, (2018), pp. 054004(12)
2）Yindi Cai, Yuan-Liu Chen, Yuki Shimizu, So Ito, Wei Gao, Liangchi Zhang, Molecular dynamics simulation of subnanometric tool-workpiece contact on a force sensor-integrated fast tool servo for ultra-precision microcutting,Applied Surface Science, Vol. 369, (2016), pp. 354-365.
3）Yindi Cai, Yuan-Liu Chen, Yuki Shimizu, So Ito, Molecular dynamics simulation of elastic-plastic deformation associated with tool-workpiece contact in force sensor-integrated fast tool servo,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (2016), pp. 1-10.
4）Yindi Cai,Xinghui Li, Ryo Aihara, Yuki Shimizu, So Ito, Wei Gao, Investigation on the three-dimensional light intensity distribution of the fringe patterns generated by a modified two-axis Lloyd's mirror interferometer,Journal of Advanced Mechanical Design, System, and Manufacturing, Vol. 10, (2016), pp. 1-10.
5）Yuan-Liu Chen,Yindi Cai,Keisuke Tohyama, Yuki Shimizu, So Ito, Wei Gao, Auto-trackingsingle point diamond cutting on non-planar brittle material substrates by a high-rigidity force controlled fast tool servo,Precision Engineering, Accepted and In press.
6）Yuan-Liu Chen,Yindi Cai, Yuki Shimizu, So Ito, Wei Gao, Bing-Feng Ju, Ductile cutting of silicon microstructures with surface inclination measurement and compensation by using a force sensor integrated single point diamond tool,Journal of Micromechanics and Microengineering, Vol. 26, (2016), 025002 (10 pages).
7）Yuan-LiuChen,Yindi Cai, Yuki Shimizu, So Ito, Wei Gao, Bing-Feng Ju, On-machine measurement of microtool wear and cutting edge chipping by using a diamond edge artifact,Precision Engineering, Vol. 43, (2016), pp. 462-467.
8）Yuan-Liu Chen,Yindi Cai, Keisuke Tohyama, Yuki Shimizu, So Ito, Wei Gao, Ductile cutting of a microstructure array on silicon surface by using a diamond tool with a negative rake angle,Proceeding of International Conference on Leading Edge Manufacturing in 21st Century: LEM21, Vol. 8, (2015), pp. 0706 (4 pages).
9）Xinghui Li,Yindi Cai, Ryo Aihara, Yuki Shimizu, So Ito, Wei Gao, Fabrication oftwo-dimensional micro patterns for adaptive optics by using laser interference lithography,Proceedings of SPIE, Vol. 9524, (2015), pp. 952404 (6 pages).
10）Yuan-Liu Chen, Yuki Shimizu,Yindi Cai, Shu Wang, So Ito, Bing-Feng Ju, Wei Gao, Self-evaluation of the cutting edge contour of a microdiamond tool with a force sensor integrated fast tool servo on an ultra-precision lathe,International Journal of Advanced Manufacturing Technology, Vol. 77, (2015), pp. 2257-2267.
